How to Replace a Dishwasher Drain Pump
A failed drain pump can leave standing water in the base or cause drain errors. Access differs by model, but the process usually involves lower access and hose removal.
Get a Confirmed Fit spare part
At Spares2Repair, when a spare part is matched to your exact model number we call that Confirmed Fit. Because spare parts can vary across production runs, sizes, and revisions, Confirmed Fit is the safest route to reduce wrong-part orders and buy with more confidence.
Option 1Search by full model numberEnter the full model number in the search box above to reach the most accurate spare-part route for your appliance and check for Confirmed Fit.
Option 2Use Fixit Fox FinderUpload a photo of the rating plate, describe the appliance, or get guided help if the model number is hard to read before you order.Option 3Browse spare partsBrowse the main spare-parts category for this appliance, then confirm compatibility by model number before checkout.Start with the search box whenever you have the full model number. Use Fixit Fox Finder if the rating plate is hard to read or you want guided help before ordering. Ordering by appearance alone is more likely to lead to the wrong part.
Browse Dishwasher spare partsWhat Confirmed Fit meansContact customer service
Before you order, use Confirmed Fit
For advice and repair topics like this one, the biggest buying mistake is ordering on appearance alone. Search by the exact model number wherever possible, because small appliance revisions can use different seals, filters, motors, pumps, lamps, shelves, or trims.
Step 1Find the full model numberUse the rating plate, product label, or model-number guide before comparing part photos or sizes.Step 2Understand Confirmed FitUse the full model code, not a short range name, because revisions and production runs can use different parts.Step 3Browse Dishwasher spare partsMove from advice into the relevant category page, then confirm compatibility by model number before buying.
At a Glance
- This replacement guide is for a typical dishwasher repair and exact access can vary by model.
- Use your model number to confirm the correct spare before ordering.
- Estimated time: 30-90 minutes.
Safety First
Disconnect power before starting. Turn off water supplies where relevant and wear gloves around sharp metal panels. Take a photo of wire positions and hose routing before disconnecting anything.
Tools You May Need
- Screwdriver set
- Pliers
- Towels
- Shallow tray
- Torch
Step-by-Step Overview
- Disconnect the power and water supply, then pull the appliance out if required.
- Drain residual water from the sump area as far as possible.
- Gain access from the side, base, or underside depending on the design.
- Photograph hose and wiring positions before disconnecting anything.
- Release the old pump, fit the new one, and reconnect hoses and wires securely.
- Run a short cycle and check for correct draining and no leaks.
Parts and Checks Before Reassembly
- Confirm the correct pump by model number because locking tabs, motor type, and wiring vary.
- Inspect the drain hose and non-return valve while you have access.
- If the pump failed due to glass or debris, clear the root cause before reassembly.
FAQ
How do I know this repair is relevant to my appliance?
A failed drain pump can leave standing water in the base or cause drain errors. Access differs by model, but the process usually involves lower access and hose removal.
Do I need the full model number before ordering the replacement part?
Use the full model number exactly as shown on the rating plate. When Spares2Repair matches that model to a compatible part we call it Confirmed Fit. Similar-looking parts can differ across revisions, production runs, and variants, so model matching is the safest route before ordering.
What should I check before stripping the appliance down?
Confirm the fault symptoms first, isolate the appliance safely, and make sure the replacement part is model-matched before taking the appliance apart any further.