Why Is My Fridge Warm but the Freezer Is Cold?
If the freezer is fine but the fridge is warm, air isn't moving from the evaporator to the fridge compartment. Causes include a stuck air damper, failed evaporator fan, blocked vents, or an iced-up evaporator.
Get a Confirmed Fit spare part
At Spares2Repair, when a spare part is matched to your exact model number we call that Confirmed Fit. Because spare parts can vary across production runs, sizes, and revisions, Confirmed Fit is the safest route to reduce wrong-part orders and buy with more confidence.
Option 1Search by full model numberEnter the full model number in the search box above to reach the most accurate spare-part route for your appliance and check for Confirmed Fit.
Option 2Use Fixit Fox FinderUpload a photo of the rating plate, describe the appliance, or get guided help if the model number is hard to read before you order.Option 3Browse spare partsBrowse the main spare-parts category for this appliance, then confirm compatibility by model number before checkout.Start with the search box whenever you have the full model number. Use Fixit Fox Finder if the rating plate is hard to read or you want guided help before ordering. Ordering by appearance alone is more likely to lead to the wrong part.
Browse Fridge & Freezer spare partsWhat Confirmed Fit meansContact customer service
Before you order, use Confirmed Fit
For advice and repair topics like this one, the biggest buying mistake is ordering on appearance alone. Search by the exact model number wherever possible, because small appliance revisions can use different seals, filters, motors, pumps, lamps, shelves, or trims.
Step 1Find the full model numberUse the rating plate, product label, or model-number guide before comparing part photos or sizes.Step 2Understand Confirmed FitUse the full model code, not a short range name, because revisions and production runs can use different parts.Step 3Browse Fridge Freezer spare partsMove from advice into the relevant category page, then confirm compatibility by model number before buying.
At a Glance
- This guide explains likely causes, quick checks, and step-by-step diagnosis.
- Includes parts and tools you may need, and prevention tips.
- Estimated time: 15-60 minutes depending on fault.
Safety First
Always disconnect power before removing panels or handling internal components. If you smell burning, see smoke, or suspect a refrigerant/sealed-system issue, stop and consult a qualified engineer.
Root Causes
- Evaporator fan not running or obstructed by ice.
- Air damper stuck closed or control fault.
- Food blocking vents; shelves or liners misaligned.
- Defrost failure causing ice-packed evaporator.
What to Check
- Hold the freezer door switch, listen for the evaporator fan.
- Look for frost behind the rear freezer panel; heavy frost suggests defrost issues.
- Inspect the air damper between compartments; ensure it opens/closes.
- Reorganise food to clear vents; confirm door closes freely.
Fixes
- Replace failed fan: How to Replace a Fridge Freezer Evaporator Fan.
- Defrost fully and test defrost components: How to Properly Defrost Your Freezer.
- Repair/replace damper assembly (model-specific); recalibrate control where applicable.
Keep It From Returning
- Avoid overfilling; keep vents visible.
- Check door seals; replace worn gaskets.
FAQ
Why Is My Fridge Warm but the Freezer Is Cold?
If the freezer is fine but the fridge is warm, air isn't moving from the evaporator to the fridge compartment. Causes include a stuck air damper, failed evaporator fan, blocked vents, or an iced-up evaporator.
How do I get a Confirmed Fit fridge & freezer spare part for this fault?
Use the full model number exactly as shown on the rating plate. When Spares2Repair matches that model to a compatible part we call it Confirmed Fit. Similar-looking parts can differ across revisions, production runs, and variants, so model matching is the safest route before ordering.
When should I stop and get professional help?
Stop and seek qualified help if the work involves unsafe live electrics, sealed systems, gas-related risks, or damage that goes beyond straightforward model-matched part replacement.